The Sheet Metal Shrinker/Stretcher is used to make window edges, wheel well flanges, dog legs, door jams, wheel tubs, tail light flange, or anything that needs a combination of curves and angles. Metal MUST first be bent in a sheet metal brake.  Just right when you need to shrink metal for inside angles as well as stretch metal for those outside angles!
  

• 16 GA. mild steel capacity
• Works on flange up to 2" wide
• Forms curve as small as 3/4" radius
• Form complete circle with diameter as small as 2" (shrinker circle would be in two pieces if under 6" diameter)
• Works on any malleable aluminum or steel, many other soft metals, and even some vinyls
• Bodies are cast iron
• Hardened tool steel jaws last longer than most careers!!
• Parts & Replacement jaws are available today!!

Use one body and interchange the jaws, or save time with two bodies. It does the same job either way!

For tips on cleaning the Shrinker/Stretcher click here!
 

This is a set. You get one stretcher jaw, and one shrinker jaw, one pneumatic/air slave cylinder and one foot pedal control valve.These are used to make auto body panels, aircraft and roofing. The jaws grab the metal, .063 steel (16 ga.) and thinner, and will stretch or shrink the metal into shape. The housing is solid steel and the jaws are hardend tool steel. The shipping weight on the set is 80 pounds.


For replacement parts and accessories click here